Home » Products » HDMI Cables

HDMI Cables

Choose the best cable(s) for your media center

A High Speed HDMI® cable is the only way to ensure that you have the ability to pass ALL signals authorized in the latest HDMI feature specification.

Ferrite Cores are small magnetic blocks wrapped around the end of a cable. They are used to suppress EMI/RFI electronic noise on the cable by absorbing the unwanted high frequencies and dissipating them as very low-level heat. This is the simplest and cheapest form of electronic noise reduction and is most effective on small gauge cabling, which is inherently more susceptible to electronic noise interference than thicker cables.

This cable supports the following HDMI features:

  • 1080p Resolution – The High Speed HDMI Cable has sufficient bandwidth to transfer 1080p video signals between 1080p rated source and sink (display) devices.
  • Audio Return Channel – Normally, your HDMI cable carries audio information along with the video from a source device (e.g. blu-ray player) to the sink device (display/television). Often times this goes through an AV receiver to drive a home theater audio system. The Audio Return Channel is primarily used to send the audio signal generated by the television when its internal tuner is used, back to the AV receiver, so that you can use your home theater audio system when watching television signals.
  • High Definition Audio – HDMI supports a full range of high definition audio types, including SA-CD, DVD-Audio, DTS-HD Master Audio™, and Dolby TrueHD™.

1.5ft 28AWG High Speed HDMI® Cable w/Ferrite Cores – Black

For those who want to attach their media center to the back of their TV (a couple of double sided tape strips work just fine for this) or whose TV is placed on an entertainment center. Not a lot of room here but, then again, you might not need it.

 

 

 

3ft 28AWG High Speed HDMI® Cable w/Ferrite Cores – Black

Just a tad longer

 

 

 

 

6ft 28AWG High Speed HDMI® Cable w/Ferrite Cores – Black

Even longer